Products & Specifications

SpeedCove
Preformed Cove Base

What is it?

SpeedCove's preformed cove base systems are:

  • made from an exclusive lightweight flexible polyester resin composite that bonds extremely well to substrates, coatings & finishes
  • a substrate that forms the correct shape & height required by the environmental health department
  • specifically designed to be coated with resinous floor finishes; it is not a stand alone product like rubber vinyl cove base
  • impact resistant, moisture proof & can withstand extreme heat and cold temperatures without warping, cracking or deteriorating
  • all pieces come in a medium cream color
  • the mold skin has been removed (front & back) to create a microporous anchor profile like 220 grit sand paper to maximize coating adhesion
  • preformed corners have a 1/4" relief cut in the lower back corner to allow them to fit snug to the wall & floor in unsquare corners significantly reducing the need for excess grinding & prep work
  • QuickSeal Edge at the bottom "foot" area is angled down to touch the floor first, transition smoothly, form a positive seal, & eliminate most patching while also adjusting slightly for uneven floors

SpeedCove provides a uniform, smooth, seamless & integral floor to wall junction to create one of the most sanitary & easily maintained floors available.

4", 6" & 8"
Radius Cove Base
  • Actual height: 4", 6", 8"
  • Cove radius: 1"+
  • Base portion thickness: ¼"
  • Length: 48"
  • Total distance out from wall: 1 ¼"
1" Radius
Cove Base
  • Actual height: 1"
  • Cove radius: 1"+
  • Base portion thickness: approximately 5/16"
  • Length: 4' or 12'
  • Total distance out from wall: 1"
  • Overall shape is 93-95° angle to fit unsquare corners with minimal/no alteration
4", 6" & 8" Preformed
90° Inside & Outside Corners
  • Actual height: 4", 6", 8"
  • Cove radius: 1"+
  • Base portion thickness: ¼"
  • Length: 10" (5" down each side of the corner)
  • Total distance out from wall: 1 ¼"
4", 6" & 8" Preformed
90° Outside Bull Nose Corners
  • Actual height: 4", 6", 8"
  • Cove radius: 1"+
  • Base portion thickness: ¼"
  • Length: 10" (5" down each side of the corner)
  • Total distance out from wall: 1 ¼"
  • Bull Nose radius: fits residential ¾" to commercial 1" radius rounded walls